Cost of DC Fittings

[mike malone]

HI
Here's REVISED prices for 22 guage fittings


i just got some costs locally of DC fittings and wondered what the group thought of the prices. This is a revision for 22 guage galv fittings.


6" 45deg adj elbows $4.33
6" 90 deg adj $5.70
spiral pipe 6" per foot $1.94 (5 feet would be $9.70)
6" to 4" connect 12" long $3.86
6" x6" x6" wye (45 deg) $10.28
i plan to pick items up, so shipping is not a prob
any comments/suggestions appreciated

thanks
mike

[Mike Kelly]

Sounds real cheap to me Mike. Where/who is the source? Must be a real good friend or a brother-in-law deal!

[mike malone]

Sounds real cheap to me Mike. Where/who is the source? Must be a real good friend or a brother-in-law deal!

it is a mfgr in sun valley just N of Los angeles

if you want their # lemme know
thanks
mike

[Robert Malone]

Hey Mike,
Is your blast gates 4"?
I had a thought about a 6" x6" x4" wye.
Prices do look real good.
bob

[John Miliunas]

Grrrr....Where were you a few weeks ago with this info?! Seriously, those aren't good prices; They're GREAT! Grab and run! :cool:

[Jack Diemer]

Seriously, they could throw up a web site, get references from the forums, and do thousands of dollars of business at those prices.

[Byron Trantham]

Hey Mike, you really want to goat? Look at Pen State for comparative prices. ;)

[John Scarpa]

Mike,
I'm just down the street from you in Yorba Linda. I'll be back setting up my shop early next month and would love to have that number for the DC fittings!

[mike malone]

Hey Mike,
Is your blast gates 4"?
I had a thought about a 6" x6" x4" wye.
Prices do look real good.
bob

hi bob
i intend to run all 6" across ceiling and down walls then switch to 4" for some machines that have 4" input. i'll make blastgates as per other members plans.
mike

[Mike Kelly]

HI
i just got some costs locally of DC fittings and wondered what the group thought of the prices. They are 24 guage (26 guage in brackets)
Oneida's price
6" 45deg adj elbows $3.61 ($3.08)
6" 90 deg adj $4.75 ($4.08) $10.14
spiral pipe 6" per foot $1.35 ($1.12) $10.80 8 ft. $20.10 for 8 ft.
6" to 4" connect 12" long $2.68 ($2.31) $ 9.06
6" x6" x6" wye (45 deg) $7.14 ($6.20) $26.04
i plan to pick items up, so shipping is not a prob
any comments/suggestions appreciated

thanks
mike

I just looked up Oneida's prices for similar parts above to the right. You had better stock up before they see what their competition is selling for. I spent a lot of money on ductwork. This would have saved me a bundle. I could have bought my table saw for what I would have saved!

[Mike Kelly]

HI
i just got some costs locally of DC fittings and wondered what the group thought of the prices. They are 24 guage (26 guage in brackets)

6" 45deg adj elbows $3.61 ($3.08)
6" 90 deg adj $4.75 ($4.08)
spiral pipe 6" per foot $1.35 ($1.12)
6" to 4" connect 12" long $2.68 ($2.31)
6" x6" x6" wye (45 deg) $7.14 ($6.20)
i plan to pick items up, so shipping is not a prob
any comments/suggestions appreciated

thanks
mike


Sorry, I didn't know that I couldn't edit the original remarks.

Oneida's Prices
6" 90 deg adj $10.14
Spiral Pipe 6" x 8ft $20.10
6" to 4" Reducer $ 9.06
6"x6"x6" wye $26.04

[mike malone]

hi bob
i intend to run all 6" across ceiling and down walls then switch to 4" for some machines that have 4" input. i'll make blastgates as per other members plans.
mike

i checked penn states prices...they are on 20 guage, so i'll check with the mfgr here and see what their 20 ga stuff costs and re-post
thanks
mike

[Chris Padilla]

hi bob
i intend to run all 6" across ceiling and down walls then switch to 4" for some machines that have 4" input. i'll make blastgates as per other members plans.
mike

Try to keep 6" all the way to the machine...change out that 4" at your machine if possible.

Chris