Jay Goddard
12-09-2003, 11:07 AM
I’m building some face frame cabinets and plan on using Euro hinges for the first time. My options therefore, are to use a specific face frame hinge or use a standard euro hinge with face frame mounting plate (ex: Blum Compact 33 vs Blum CLIP hinge w/ ff mounting plate). Does anyone have a preference one way or the other?
Pros and Cons seem to be:
<table cellspacing="0" cellpadding="4" border="0">
<tr>
<!-- Row 1 Column 1 -->
<td>
</td>
<!-- Row 1 Column 2 -->
<td>
<b>Compact 33</b>
</td>
<!-- Row 1 Column 3 -->
<td>
<b>CLIP</b>
</td>
</tr>
<tr>
<!-- Row 2 Column 1 -->
<td>
Opening angle
</td>
<!-- Row 2 Column 2 -->
<td>
110°
</td>
<!-- Row 2 Column 3 -->
<td>
107°-170°
</td>
</tr>
<tr>
<!-- Row 3 Column 1 -->
<td>
Price
</td>
<!-- Row 3 Column 2 -->
<td>
both about the same
</td>
<!-- Row 3 Column 3 -->
<td>
</td>
</tr>
<tr>
<!-- Row 4 Column 1 -->
<td>
Adjustment
</td>
<!-- Row 4 Column 2 -->
<td>
2 way (fixed depth)
</td>
<!-- Row 4 Column 3 -->
<td>
3 way
</td>
</tr>
<tr>
<!-- Row 5 Column 1 -->
<td>
<b>Depending on overlay:</b>
</td>
<!-- Row 5 Column 2 -->
<td>
</td>
<!-- Row 5 Column 3 -->
<td>
CLIP 120°
</td>
</tr>
<tr>
<!-- Row 6 Column 1 -->
<td>
Door protrusion
</td>
<!-- Row 6 Column 2 -->
<td>
0 – 1/2”
</td>
<!-- Row 6 Column 3 -->
<td>
7/16”- 13/16”
</td>
</tr>
<tr>
<!-- Row 7 Column 1 -->
<td>
Hinge protrusion
</td>
<!-- Row 7 Column 2 -->
<td>
3/16” – 1 1/8”
</td>
<!-- Row 7 Column 3 -->
<td>
13/16” – 1 5/32”
</td>
</tr>
</table>
The only other disadvantage I can see for the Compact 33 is the built in 3/16” gap between door and face frame. Other than protrusion into the cabinet opening, are there any other practical considerations?
Pros and Cons seem to be:
<table cellspacing="0" cellpadding="4" border="0">
<tr>
<!-- Row 1 Column 1 -->
<td>
</td>
<!-- Row 1 Column 2 -->
<td>
<b>Compact 33</b>
</td>
<!-- Row 1 Column 3 -->
<td>
<b>CLIP</b>
</td>
</tr>
<tr>
<!-- Row 2 Column 1 -->
<td>
Opening angle
</td>
<!-- Row 2 Column 2 -->
<td>
110°
</td>
<!-- Row 2 Column 3 -->
<td>
107°-170°
</td>
</tr>
<tr>
<!-- Row 3 Column 1 -->
<td>
Price
</td>
<!-- Row 3 Column 2 -->
<td>
both about the same
</td>
<!-- Row 3 Column 3 -->
<td>
</td>
</tr>
<tr>
<!-- Row 4 Column 1 -->
<td>
Adjustment
</td>
<!-- Row 4 Column 2 -->
<td>
2 way (fixed depth)
</td>
<!-- Row 4 Column 3 -->
<td>
3 way
</td>
</tr>
<tr>
<!-- Row 5 Column 1 -->
<td>
<b>Depending on overlay:</b>
</td>
<!-- Row 5 Column 2 -->
<td>
</td>
<!-- Row 5 Column 3 -->
<td>
CLIP 120°
</td>
</tr>
<tr>
<!-- Row 6 Column 1 -->
<td>
Door protrusion
</td>
<!-- Row 6 Column 2 -->
<td>
0 – 1/2”
</td>
<!-- Row 6 Column 3 -->
<td>
7/16”- 13/16”
</td>
</tr>
<tr>
<!-- Row 7 Column 1 -->
<td>
Hinge protrusion
</td>
<!-- Row 7 Column 2 -->
<td>
3/16” – 1 1/8”
</td>
<!-- Row 7 Column 3 -->
<td>
13/16” – 1 5/32”
</td>
</tr>
</table>
The only other disadvantage I can see for the Compact 33 is the built in 3/16” gap between door and face frame. Other than protrusion into the cabinet opening, are there any other practical considerations?