View Full Version : Where do YOU order sandpaper?
Sammy Shuford
02-21-2007, 8:43 PM
Been buying at the borg, but there has to be a better source for good sandpaper.
Doug Shepard
02-21-2007, 8:48 PM
Klingspor at http://orders.woodworkingshop.com/ is where I've bought most of mine although I guess I'll be buying my ROS disks from Festool from now on since switching sanders.
Sammy Shuford
02-21-2007, 8:51 PM
Thanks,
Sam
Glen Blanchard
02-21-2007, 9:07 PM
I'm with Doug.
In the past - Klingspor
In the future - Bob Marino
Nancy Laird
02-21-2007, 9:24 PM
Try A&H Abrasives papers, available at www.woodworker.com (http://www.woodworker.com).
Nancy
Roy McQuay
02-21-2007, 9:38 PM
I buy mostly ROS hook and loop boxes of 100 in grits from 60 to 320 from Amazon. It sells for 14.99, but if you buy 3 boxes or more, which I do, it is $11.99 a box with free delivery. That was the price last time I ordered, which has been a while. I don't use that much regular paper so the borg prices are okay with me.
Larry Fox
02-21-2007, 9:57 PM
TargetCoatings for Mirka Bulldog and Homestead for pretty much everything else.
glenn bradley
02-22-2007, 12:20 AM
I've been hooked on Norton 3X for awhile but Kilngspor's price seems to be a little better and I've read that it is good stuff.
Bob Reda
02-22-2007, 5:27 AM
I usually get mine through Industrial Abrasives here in Pa. Good people great service and good prices
Bob
Mike Parzych
02-22-2007, 10:15 AM
I have an article from a woodworking magazine in which discs were rated by the relative cost to remove a gram of wood. Klingspor was best, Norton 3X next. The 3M stuff at the BORGS was worst - and WAY worst!
Al Wasser
02-22-2007, 11:08 AM
I don't know about Klingspors cuz they won't send me a catalog, but I sure like the Norton 3X where ever you get it. I also agree that that the 3M stuff is not worth buying
Alfred Clem
02-22-2007, 11:58 AM
I do quite a bit of woodturning on my lathe. A while back, I discovered that the Japanese make extra-high quality sandpaper that is ideal for this use. I mean numbers that are 'way up there -- ultra-fine grade paper that lasts and lasts. I use a razor knife to slice the paper into inch-wide strips. My last batch came from a booth at a woodworking show, but I am sure there are retailers that can help you.
John Terefenko
02-22-2007, 5:36 PM
Compare the prices at www.industrialabrasives.com (http://www.industrialabrasives.com) Get all my paper there and can get it cut to size also.
Kyle Stiefel
02-22-2007, 6:50 PM
I usually get mine through Industrial Abrasives here in Pa. Good people great service and good prices
Bob
I am with Bob here on my sheet goods I get it through Industrial Abasives in particular their Rhyno line, great service and prices.
http://commerce.riverweb.com:8002/shop.html
And of course Festool for the Rotex.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.