Jeff Caskie
02-19-2007, 2:36 PM
What settings (stop collar and jig) do people use for 3/4 plywood. If I use the 3/4 settings.. and the proper stop collar setting for 3/4, the screw does not exit the center of the ply. In addition, using the recommended 1 1/4 screw with these settings will allow the screw to 'almost' pop out the other end. Presumably, this is because 3/4 ply is not really 3/4 in width. So, that being said... what 'modified' settings do you use for plywood?