Alex Berkovsky
02-17-2007, 2:25 PM
I can't be that dense! :eek: I read the manual 3 times and still can't figure out how to adjust the lower guide bearings lateraly so that they are slightly behind the blade gullets. :o It's pretty simple on to adjust the upper assembly, but the lower one is kicking my behind.
Never mind... I got it. I was loosening the right cap screw but the assembly was slightly jammed and I wasn't forcing it.
Never mind... I got it. I was loosening the right cap screw but the assembly was slightly jammed and I wasn't forcing it.