castor aviles
02-11-2007, 8:23 PM
Hi I sent one of my systimatic combination blades to resharpening to Forrest and I have to say that I'm very unhappy with the results, I just got the blade back and it did some cuts and now it leaves lots of marks on the wood, then I tried with a new Freud combination blade and no marks at all just like the systimatic before sharpening, has somebody else experience the same? it cost me 40dlls with the shipping I wouldn't mind so much if the blade performed like new. I never had a blade sharpened before but so I don't know if that is normal. I took a picture but is not too good the board on top was cut with the resharpened blade the bottom board was cut with the new Freud, thanks for reading this.