PDA

View Full Version : Manual needed for Jet JBM-5 and minor gloat



Craig Stueve
02-11-2007, 4:48 PM
I managed to pick up the floor model Jet JBM-5 at my local Menards. The department manager told me that they were no longer going to be displaying them in the store. For no more mortises that I do my drill press attachment has worked fine. Since I was not really looking to buy a dedicated mortiser I decided to make a low offer to the manager and see what his answer would be. The unit was missing the 2 supplied chisels and the manual so I offered $150. Much to my surprise he said OK. So I loaded up the unit and continued shopping. At the register I proceeded to place my 17% off sack over the top of the mortiser where it was clearly over 1/2 way on so that meant it qualified for the discount. I have sent in for my $25 rebate so I should wind up with about $110 total invested in my mortiser.

Aside from a few minor scratches it is in great shape. My chisels that I used on my DP attachment work just fine. All I need is a copy of the manual. I have checked the WMH site and there is no manual there. I am hoping that someone here might have one that they could scan and PM or email to me.

Craig

Jim Becker
02-11-2007, 5:38 PM
Strange...they have all the PM manuals at http://www.wmhtoolgroup.com/OurProducts/index.cfm?navPage=3, but the Jet JBM-5 is missing for some reason. I have the manual somewhere, but I'm not sure where.

Craig Stueve
02-11-2007, 6:14 PM
Strange...they have all the PM manuals at http://www.wmhtoolgroup.com/OurProducts/index.cfm?navPage=3, but the Jet JBM-5 is missing for some reason.

That is exactly what I thought as I looked again and again for the manual on the website. I was beginning to think I was just missing something incredibly obvious once again.:rolleyes:

Craig

Craig Stueve
02-12-2007, 5:09 PM
Anyone?


Please.

Jim Becker
02-12-2007, 6:07 PM
Craig, I'll try to find my manual. If I do and can get it scaned, I'll let you know.

Steve Clardy
02-13-2007, 7:02 PM
I have one somewhere if Jim doesn't find his

Craig Stueve
02-14-2007, 4:44 PM
Thanks Steve. I'm in no rush if either you or Jim can find your copy I would appreciate it.

Craig

Dick Bringhurst
02-14-2007, 5:10 PM
Craig - I have one I'll copy and send you if you will email me your address. Dick B. (fernhopper@comcast.net)

Craig Stueve
02-14-2007, 5:15 PM
I just sent you an email Dick.

Craig

Craig Stueve
02-20-2007, 10:34 PM
Thanks to Dick I now have the copy of the manual I wanted.

Craig