Bolt Hole Caster?

[Rick Beko]

I am in the market for some casters to replace my levelling feet on my Jessem router table. On ebay I found the following casters..[item 230003120922]. In the description is states bolt-hole fitting (3/8", 10.5mm). When I asked about the thread size the response was that there was no thread in the bolt hole?? I was thinking if the thread was 3/8 x 16 I could use threaded rod and replace my levelling feet. Can someone explain to me how you would connect a Bolt Hole Caster ?

[jonathan snyder]

Rick,

Good question. Perhaps the seller did not understand your question. If you are looking for casters, check out Hartville Tool http://www.hartvilletool.com/product/11881 These are great casters. I have them on two pieces of equipment and a rolling cart for my planner.

Jonathan

[Rick Beko]

Hi Jonathan, do those casters lock the wheels and the the swivel?

[jonathan snyder]

Rick,

Yes, it locks the wheels and the swivel, and they roll effortlessly.

Jonathan