Help with shaper cutter

[Joe Chritz]

I have an older 3 wing Freud raised panel cutter (actually two) that I need a rub collar for.

I have been unable to find a listing anywhere for the correct size for them. Anyone have one of these setups and knows the size collar or can mic it and let me know.

Thanks in advance

Joe

[Charles McCracken]

Joe,

If you know the item number of the cutter(s) I can easily recommend the correct rub collar. Otherwise, let me know the bore diameter and the distance from the bore to the outer tip of the carbide and I should be able to figure it out for you.

[Joe Chritz]

Straight from the horse so to speak.

The cove profile is almost new and it is EC-209. The ogee is worn but appears to be EC-210.

Both are 3/4 bore and 5" diameter. Wiked spinners for sure.

Thanks a bumch.

Joe

[Charles McCracken]

Joe,

The rub collar we offer for those is the RC-002 which is 1-3/4" diameter. Let me know if I can be of further assistance.