Per Swenson
01-28-2007, 9:19 AM
I posted this thread on the Festool Owners group.
In the controversial Domino thread a member used my picture
in a derogatory way, insinuating I am selling bridges.
Nothing of the sort. Here is the thread in its entirety.
Wait he didn't say I was selling bridges, I received no credit at all.
Posts: 12
PM »
Hello Every One,
Often the subject comes up about guide rail linkage.
Some do, some don't. Link em up that is.
I have never had a problem randomly linking any of our rails together.
I don't do any thing special. No secret way, no mystery and no complaint.
I don't whip out my digital calipers or gun smithing tools.
Just take a quick look and cut.
Today we trimmed the back of the front bar with the 1400 and a 1/2 inch
straight bit. tomorrow add the drink rail.
Then the Bar rail goes on.
Some minor punch list items and its check please.
Per
In the controversial Domino thread a member used my picture
in a derogatory way, insinuating I am selling bridges.
Nothing of the sort. Here is the thread in its entirety.
Wait he didn't say I was selling bridges, I received no credit at all.
Posts: 12
PM »
Hello Every One,
Often the subject comes up about guide rail linkage.
Some do, some don't. Link em up that is.
I have never had a problem randomly linking any of our rails together.
I don't do any thing special. No secret way, no mystery and no complaint.
I don't whip out my digital calipers or gun smithing tools.
Just take a quick look and cut.
Today we trimmed the back of the front bar with the 1400 and a 1/2 inch
straight bit. tomorrow add the drink rail.
Then the Bar rail goes on.
Some minor punch list items and its check please.
Per