Lloyd Parker
01-18-2007, 8:41 PM
I have the following shopping list for a class on making brass handplanes. Anybody have suggestions on the best place/quality to get this stuff?
1. Hacksaw with 18 tpi and 24 tpi blades
2. Jeweler's saw frame with a dozen blades. The size of the blades is not critical; #6 or #8
3. Small Square
4. Flat files 10" one bastard cut(course), one second cut(fine)
5. Three cornered needle file 4"-6"
6. File card or stiff wire brush for cleaning files
Thanks for the help.
1. Hacksaw with 18 tpi and 24 tpi blades
2. Jeweler's saw frame with a dozen blades. The size of the blades is not critical; #6 or #8
3. Small Square
4. Flat files 10" one bastard cut(course), one second cut(fine)
5. Three cornered needle file 4"-6"
6. File card or stiff wire brush for cleaning files
Thanks for the help.