JOHN E Tarro
01-16-2007, 1:24 PM
I am building two dressers and chests of drawers (wife gets one set , daughter the other). I need to make the legs (1 3/4 in. square by 55 inches long) using the 4 mitered sides with a solid core method. NEVER DONE IT THIS WAY BEFORE.
I have done a small 14 inch test using tape to get the pieces in place and clamps to tighten and hold them untill set. It worked well. I have seen tape used but I don't think this will work here because of the length and other factors. Remembering that the legs are only 1 3/4 inch square, is there any other method that out there that would work. I have thought of using straping but it would get stuck because of the small size of the legs.
Any suggestions?
Thanks!:o
I have done a small 14 inch test using tape to get the pieces in place and clamps to tighten and hold them untill set. It worked well. I have seen tape used but I don't think this will work here because of the length and other factors. Remembering that the legs are only 1 3/4 inch square, is there any other method that out there that would work. I have thought of using straping but it would get stuck because of the small size of the legs.
Any suggestions?
Thanks!:o