chris fox
01-14-2007, 8:39 PM
I set out to plane up some walnut but having all sorts of problems. I havent had much of an issue on earlier projects white oak, maple etc.
First, I am getting alot of snipe marks across the boards second, boards getting stuck too much half way through. Third, alot of interupted cutting.
The boards are fairly flat. So maybe have been getting lucky on previous projects, being that I am a fairly new WW'er. I bought this planar used and have been happy with it to date.
Any ideas? The outfeed and infeed tables are flat against main bed.
thansk
Chris
First, I am getting alot of snipe marks across the boards second, boards getting stuck too much half way through. Third, alot of interupted cutting.
The boards are fairly flat. So maybe have been getting lucky on previous projects, being that I am a fairly new WW'er. I bought this planar used and have been happy with it to date.
Any ideas? The outfeed and infeed tables are flat against main bed.
thansk
Chris