Rees Midgley
01-14-2007, 8:00 PM
I am building a workbench. I own a Veritas twin screw vise system that I want to mount to the end of a Grizzly 30 x 60 inch Maple workbench top. With a front apron, the end of the top will be 32 inches wide. The max allowed screw to screw distance is 16-7/8 inches. If I add a 32 by 2 inch face to the vise, each end will extend about 7-1/2 inches from the screw. Will this create problems? Would it be better to use a shorter face for the vise and mount it to one side of the end of the workbench?