Nissim Avrahami
12-22-2006, 12:27 PM
Good day
Most of the router tables are in a cabinet.
Because I don't use cabinet as router table, I made a mock-up so, a little bit of imagination please...
I have the Hitachi M8 router.
On the last 2 pics, I removed the back-cover to show that the center part over the motor/rotor is blocked (same on the cover), and gluing a metal plate of 3/4"~1" will not effect the cooling airflow.
Please check your router.
Regards
niki
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL001inch.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL002.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL003.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL004.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL005.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL006.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL007.jpg
Most of the router tables are in a cabinet.
Because I don't use cabinet as router table, I made a mock-up so, a little bit of imagination please...
I have the Hitachi M8 router.
On the last 2 pics, I removed the back-cover to show that the center part over the motor/rotor is blocked (same on the cover), and gluing a metal plate of 3/4"~1" will not effect the cooling airflow.
Please check your router.
Regards
niki
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL001inch.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL002.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL003.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL004.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL005.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL006.jpg
http://i50.photobucket.com/albums/f321/avrahami/Router%20Lift/RL007.jpg