Unisaw SALE!!!

[Jeff Weight]

Found this on another forum, and thought I'd share it here.

"Amazon just started free shipping on there unisaws. Delta 36-830A 10-Inch Right Tilt 3 Horsepower Cabinet Saw with 30-Inch Unifence, 1 Cast Iron Extension Wing, Table Board, and Legs, 230-Volt 1 Phase for $899.00 free shipping!"

Link: http://www.amazon.com/Delta-36-830A-Horsepower-Unifence-Extension/dp/B0007KQXRW/sr=8-1/qid=1166802073/ref=pd_bbs_sr_1/102-5563651-4764941?ie=UTF8&s=hi

[Matt Day]

Wow! That's almost half of what others are selling it for.:eek:

[Larry Fox]

Sure this is a Unisaw? It says "cabinet saw" which a Unisaw certainly is but it does NOT say Unisaw.

This link specifically calls it a Unisaw.
http://www.amazon.com/Delta-36-830LA-Horsepower-Unifence-Extension/dp/B0007KQXSG/ref=pd_sbs_hi_1/102-8764737-1881752

Sure does look like one though and further down the page they do provide a link to the Right Tilt Unisaw that takes you to the 830A page. Probably is but there is certainly some ambiguity.

Despite the fact that I own a Unisaw, I will admit that I don't know much about the various models.

[Jim Becker]

Larry's point is good. As far as I know, Delta has a lower priced line that "looks" like the Uni, but is not a Unisaw.

[John Hulett]

If you go to another retailer - I used woodworker.com - and paste in the model number, 36-830A, it comes up as $1699 for a 3HP RT 30" UNIFENCE UNISAW PKG.

Also, if you enlarge the image on Amazon, you see it says Unisaw.

[Bill Simmeth]

As far as I know, Delta has a lower priced line that "looks" like the Uni, but is not a Unisaw.
If you go to Delta's website and cross-reference the model number show on the Amazon page it is indeed a genuwhine unisaw, not the low-priced spread...
http://www.deltamachinery.com/index.asp?e=136&p=6076

[Jim W. White]

WOW ...that's an awesome deal. ....Just don't have the money right now. :(

this looks VERY MUCH above board. I would not hesitate if I was looking for a RT tilt UNI and had the funds...... (the check out process also tells you it's normally priced MUCH higher)

Another couple of good deals on what they are calling their end of year clearance...

http://www.amazon.com/Freud-LU84R011-50-Tooth-Combination-Blade/dp/B0000225V8/ref=br_lf_m__1_5_ttl/102-8602844-8201721?%5Fencoding=UTF8&m=ATVPDKIKX0DER&s=hi

http://www.amazon.com/Freud-LU85R010-80-Tooth-Alternate-Perma-SHIELD/dp/B0000223KU/ref=br_lf_m__1_14_s_o_p/102-8602844-8201721?%5Fencoding=UTF8&m=ATVPDKIKX0DER

[Travis Hirst]

That is one heck of a deal there. If it were left tilt I'd cancel the order on my Grizzly g0478 and go with that in a heartbeat. I just prefer the left tilt better.

Travis

[Jeff Weight]

WOW ...that's an awesome deal. ....Just don't have the money right now. :(
I'm in the same boat Jim. I only hope others on this board will be able to take advantage of this SMOKING HOT DEAL!

[Robert Mayer]

I'm in the same boat Jim. I only hope others on this board will be able to take advantage of this SMOKING HOT DEAL!

I asked my wife, she said no....lol

[Gary Groves]

Two different saw packages. the cabinet saw is 899 the uni is 1226.99. both with free shipping.

[Jeff Weight]

Two different saw packages. the cabinet saw is 899 the uni is 1226.99. both with free shipping.
Gary, the saw at Amazon the 36-830A is a Unisaw. See this link at the Delta website. http://www.deltamachinery.com/index.asp?e=136&p=4727

Click on the BUY NOW link on the Delta page and choose Amazon as the supplier.

[Jim Becker]

Thanks for the clarification on the model, folks. Indeed a very nice deal on a UniSaw.

[Noah Katz]

Not sure, but I thought the X5 version was the one that was equivalent in substantialness to the older Unisaws.

[michael tessler]

I read on another web site that they had a limited quantity and have sold out.

Several weeks ago I purchased a 36-800 Uni w/30" Bies fence for $1350 (floor model). I thought that was a pretty good deal, until today. But......I'd rather have the Bies fence.

[David G Baker]

I went to the Amazon site a few minutes ago and the sale no longer shows up. It was there an hour ago.
Guess I spent too much time thinking about it.
David B

[scott spencer]

The pic was of a Uni. While I was playing around in there, the price jumped to $1,893.50! :eek:

"Not me, not now"! :D

http://ec2.images-amazon.com/images/P/B0007KQXRW.01._SS500_SCLZZZZZZZ_V59791934_.jpg

[Jeff Weight]

If you missed it or waited to long, the price shot back up. It's now $1,893.50 with free shipping. That's $1,000 more than this mornings price. :(

[scott spencer]

If you missed it or waited to long, the price shot back up. It's now $1,893.50 with free shipping. That's $1,000 more than this mornings price. :(

Yeah, but "Free Shipping"! Come on! ...how can you pass that up?! :D

[Jim Becker]

Well, Scott, I know where a very nice Jet LT is available if you don't mind a "short" drive... ;)

["Jason Belous"]

I was thinking that this was probalby deltas industrial version of the unisaw, i recently saw that sale at ww shop for $899, but while on amazon noticed they had all sorts of tools for half off.

[scott spencer]

Well, Scott, I know where a very nice Jet LT is available if you don't mind a "short" drive... ;)

I'll think it over. What's for dinner BTW? ;)

[Mark Singer]

The Uni saw is a very good cabinet saw!...

[Jim Becker]

I'll think it over. What's for dinner BTW? ;)

Given all the excellent reviews you have posted over time, I could certainly entertain that in if you can handle my kids' table manners... :o

[scott spencer]

Given all the excellent reviews you have posted over time, I could certainly entertain that in if you can handle my kids' table manners... :o

If your kids have good table manners, it could be awkward...otherwise I'll fit right in! :p :D

[John Hulett]

I saw after lunch that it was back up to the $1893 price. I thought I'd take a chance and call to see if I could sneak one in at the $899. I figured I had nothing to lose. Unfortunately, they said no. Now I'm kicking myself for removing it from the cart... should have done it while I had the chance. That's what I get for considering the thoughts and feelings of those I love. Damn wedding vows!:p

- John

[Ross Canant]

To put your mind at ease, Amazon never honors mistakes in pricing even if you get the order placed and accepted. They will wait several weeks then send you an email canceling it or offering it at the corrected price.

[Jake Helmboldt]

I question these "mistakes". It happens way too much and seems to happen when something gets a lot of traffic. I call it bad business, whatever it is.

I was going to get a Christmas gift for my wife from them until they pulled that BS. I was trying to research the product and after revisiting the site several times in a couple days it suddenly shot way up in price. No thanks.

JH

[Paul Douglass]

Well, I was too chicken to order this morning, even though my wife said go for it. I was afraid what it would really cost me in the long run everytime she reminded me of it!:o Got a question though, is right tilt a good thing or bad? Is it just personal preference or what?

[Jim Becker]

Personal preference, Paul. If you are used to one, go for that, or change if you feel a reason to do so. For some operations, LT can be safer and more effective and for others, RT is better.

[Doug Hoffman]

Well,I ordered one early.I have already been notified it shipped.It is coming in 5 cartons ,scheduled for Dec 29. I'll let you know when it
arrives.

[Jack Diemer]

Congratulations. A unisaw cheaper than a 1023S. Pinch yourself when the boxes show up to make sure your not dreaming.

[Jeff Weight]

Well, I was too chicken to order this morning, even though my wife said go for it. I was afraid what it would really cost me in the long run everytime she reminded me of it!:o Got a question though, is right tilt a good thing or bad? Is it just personal preference or what?

IMO Left tilt is the way to go. However, I would not pass up a deal like that just because it is right tilt.

[Paul Douglass]

Well,I ordered one early.I have already been notified it shipped.It is coming in 5 cartons ,scheduled for Dec 29. I'll let you know when it
arrives.

Please keep us informed. I know I am going to hate myself for not pushing that "complete order" button!!!!!!!!:mad: :mad: :mad:

Buy the way Doug, congrats on doing it!

[Jeffrey Schronce]

A buyer for Amazon Tool Crib posts on another forum. Per his post this is the details of this deal :
"all,
to answer-- these are unisaws and they are made in the US
Rob had some units he bargained with Delta for (kind of a net down thing). Extremely limited quantities. He did not mean to go with free freight on this unit because he discounted it so much. He is out of units now. I wich we had hundreds of things like this (and we are trying for them). I am going to try and convince rob to join the forum and have him post upcoming things like this so you can take advantage of these, and ask him these questions direct. "

Sounds like those of you on top of this deal got a great deal!

[Doug Hoffman]

Well,I said I would let you know when my uni arrived. I unloaded the 5 packages about 30 minutes ago.All arrived in great shape.Truck didn't have a lift gate,thank goodness for my Kubota with end loader. I don't have time to set it up until middle of next week.I have to run several more 220 outlets.I have a new 8" jointer and a used 3hp shaper,with sliding table and power feed coming next week. I am going to retire in 4 months.Now I am checking on cnc lasers.Boy,this retirement thing is sure expensive!