Bart Leetch
12-17-2006, 11:14 PM
I have put this together over time to cut down plywood the first 2 shots shows the bottom to which I added pieces of old mouse pad for sticky non skid bottom it works great as well as showing the top of the guide & saw. The second shot shows my CQ cross-cut jig.
Over to the right in the 3rd pic. on the table-saw wing are 3 6" wide strips I just cut using the CQ saw-system without clamps & it worked great.
Ya I know it not a EZ Smart just a CQ Saw System.
Over to the right in the 3rd pic. on the table-saw wing are 3 6" wide strips I just cut using the CQ saw-system without clamps & it worked great.
Ya I know it not a EZ Smart just a CQ Saw System.