John Piwaron
11-10-2003, 8:56 AM
Well, the table project was going well. Probably too well. While I'm self congratulating myself on a neat orderly project thats going according to plan, Murphy is waiting with bad news near the end of physical assembly. Turns out my corner blocks where not bevel cut square to their width, resulting in the aprons being square to themselves, yet not perpendicular to the table top.
So on Sunday I formulated the plan that I would remove the screws, saw off the corner blocks and make new ones. It's just been a PITA. Depending on how things go upon completion of my repair, I'm ready to make an entirely new apron assembly, but I have hopes for my repair.
It's all such a waste of time when I really want to get to building my new desk.
So on Sunday I formulated the plan that I would remove the screws, saw off the corner blocks and make new ones. It's just been a PITA. Depending on how things go upon completion of my repair, I'm ready to make an entirely new apron assembly, but I have hopes for my repair.
It's all such a waste of time when I really want to get to building my new desk.