View Full Version : How long should a Tenon router be you think ?
Jake Darvall
12-12-2006, 4:50 PM
I've had a bit of a search on this site for it, but no luck yet.
I was told Harry, had a picture up of a tennon router, and I was hoping someone would help me find it.
I want to make one, since I think the concepts sounds good. Thinking won't need a supporting block since its so long etc.
But how long should I make it do you think to give enough leverage to keep that blade parallel with the face. Just want to get an idea.
Ta. :)
Jake Darvall
12-12-2006, 5:03 PM
Sorry. I'm wasting your time. Just looked now at the bottom of the screen and there it was. oh dear. sorry about that.
Sam Quigg
12-13-2006, 1:06 PM
Sorry, Jake....where??? Me curiosity is getting the better of me.
Chuck Nickerson
12-13-2006, 1:12 PM
in the 'Similar Links' box. Because he put 'Tenon Router' in the title, SMC did the search for related topics for him.
Sam Quigg
12-13-2006, 6:54 PM
As I believe one of your more expressive and erudite citizens says................ "DOHH!!!" Thanks, Chuck. Happy wood cobbling Jake.
harry strasil
12-21-2006, 4:17 PM
Sorry about not posting sooner Jake. We have had some health issues and other distractions here and I just saw your post cruising thru back posts.
I believe the one in the picture is about 12 or 16 inches long, the hole the tool is mounted in is approx 2 inches I think, I can't get to it at the moment to measure.
respectfully
Jr.
Jake Darvall
12-22-2006, 12:05 AM
Sorry about not posting sooner Jake. We have had some health issues and other distractions here and I just saw your post cruising thru back posts.
I believe the one in the picture is about 12 or 16 inches long, the hole the tool is mounted in is approx 2 inches I think, I can't get to it at the moment to measure.
respectfully
Jr.
Thanks Jr,
I've got a ruff cutting table saw, that for the life of me I can't tune properly (what you get when you buy cheap eh).... and I just can't be affording buying a new one right now.
anyway, I like the idea of ripping off the cheeks of tenons near dimension, then just clean up with a few sweeps of that tenon router of yours.
But, I want to be able to cover tenons as long as you find in standard doors with that have through tenons. So, I wanted to make sure it was long enough. I figured near 16", but still nice to know what works.
Thanks again. . Hope things are going well in the health department.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.