PDA

View Full Version : Another Ornament Idea



Ray Mighells
12-11-2006, 4:13 PM
I haven't tried this yet, but will this PM. One of the posts had several crosses. I'm going to set up a run in 3 or 4 different colored woods, then use the scraps to fill the piercings in a contrasting wood. Multiple colors in one piece should be possible. Wish I had some different colored acrylic mirror. I only have a little of clear acrylic so may use some with the wood. There are several intricate snowflakes that could prove interesting using multiple colors too. If you want to try this, I suggest you clean the bottom of your table tray so you can find the small pieces that fall through. I think to maintain some sort order it would be a good idea to tape your pieces on top after cutting to expedite locating pieces. A lot of work, but better than TV. I will try to post some pics tomorrow

Joe Pelonio
12-11-2006, 4:51 PM
Interesting idea, maybe try spraying some of the acrylic mirror with translucent paint. It's readily available for airbrish but also some of the
small hobby paint as used on model cars is translucent.