Dumb Clamp N Tool question

[Henry Kinney]

I bought a clamp N tool bar clamp guide from Woodline for use with a dadowiz. Now I can't figure out how to loosen the clamp itself. Naturally it did not have instructions. Anyone out there who has used this please help an idiot.

[Steve Clardy]

If its like mine, raise the lever up, slide the end tight, push lever down to clamp. Raise lever up to release

[Doug Shepard]

What Steve said. There's two lever settings as well. The first one (lever is parallel with the clamp rail) will tighten it down. The 2nd position, flipped all the way down will really tighten it.