View Full Version : Unifence Jig Kwestion
Gary Groves
11-29-2006, 8:05 PM
I have a Delta contractor TS with a Unifence.
I'm wanting to build some TS jigs, and most of them reference using a Bies. (or similar) fence. the Unifence is not structured to allow for easily attaching jigs.
Does anyone have pictures of jigs with the unifence?
David Schoemaker
11-29-2006, 8:49 PM
Cheated and got the replacement fence from Peachtree. It has lots of T Slots in it for jig attachment.
Dave
Hoa Dinh
11-29-2006, 8:52 PM
You can get the Uni-T-Fence (http://www.ttrackusa.com/unifence.htm). But I myself have never found the need for it. Read this article (http://benchmark.20m.com/tools/Unisaw/UnisawUnifence/unisaw_unifence.html).
Jim Becker
11-29-2006, 8:59 PM
I did build a tenoning jig that ran on the UniFence years ago when I had one (miss it...), but don't have any pictures. It was somewhat challenging. "Today", I'd buy the Uni-T-Fence that Hoa mentions for use when jigging is necessary. Given the design of the UniFence, it's quick and easy to change between the original and the alternative fence.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.