View Full Version : 3rd party Cutting Table
Clyde Baumwell
11-29-2006, 9:33 AM
I unsuccessfully tried searching for the name of the member that makes the vector cutting tables for $60. I know i was at his website last week but cannot locate his name or the website. Any help?
Dana Florian
11-29-2006, 9:41 AM
Try this link, I think this should help. http://www.stl-laser.com/laser-cutting-grid.html
Dave Fifield
11-29-2006, 5:34 PM
Mike Null is the fellow you're looking for.
:Dave F.
Mike Null
11-29-2006, 8:20 PM
Thanks to both of you. I have sent a PM to Mr. Baumwell.
John Esberg
12-07-2006, 7:35 AM
Here's some examples of the difference a cutting grid does for your quality of work.
On the example of the four pieces, please note the following. The left pieces were cut without a grid. The right side was with the grid and has almost no bad residue.
The other picture shows what the blank of material looks like afterwards in comparison.
It's worth the money to get one.
DAK
Mike Null
12-07-2006, 3:39 PM
John:
That's impressive! Would you mind if I used your pictures?
Mike Null
John Esberg
12-10-2006, 6:03 AM
Mike,
Go right ahead and use the pictures. I just ask you keep my name on them.
V/R,
DAK
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.