Who makes a good quality rail and stile shaper set?

[chris del]

I am interested in buying a good quality rail and stile set for my 3/4" spindal shaper. I think freeborn is out of my budget but I would still like a good quality set.
I would prefer a 2 piece set ove a 1 piece.

Chris

[Per Swenson]

I wouldn't and don't skimp on cutters, router bits and saw blades.

This is where the rubber meets the road so to speak.

I was going to suggest Freeborn, before I read your entire post.

Any thing less, and there are better, I would feel cheated.

Per

[Scott Hochuli]

I have been pleased with infinity shaper cutters. I have the 1 1/4" bore insert sets, but noticed they carry the 3/4 bore too.

http://www.infinitytools.com/default.asp

[Travis Porter]

I bought a Freud set which included stile and rail, glue line, door lip, and raised panel cutter for about $320. I have been very happy with them and they are good quality IMO.

[Jay Brewer]

Ive had good luck with Grizzly cutters, very clean cut, the reversible rail and stile cutters work well and a good price, the down side is switching them back and forth. If you plan on alot of doors get the dedicated R & S cutters

[Charles McCracken]

You didn't mention a budget or a profile preference but the Freud EC-260 (as well as some other profiles) can be found for well under $300:

http://ec3.images-amazon.com/images/P/B00004VWMX.01._AA280_SCLZZZZZZZ_.jpg