Mark Mandell
11-25-2006, 5:25 PM
I've had a P'max 22-44 Pro for a number of years, and it's always been great. However, when I went to sand a wide glue up the other day, I found that my drum is about 1/8" low at the outboard end. I've tried following the manual directions for adjusting the outboard bearing assembly to bring the drum up, however, when I retighten things up, I've still got the 1/8" drop.
Remembering that this is the 22-44 Pro, not the 22-44 (or "Plus") with tilt adjustment jack bolts back at the inboard head, has anyone here had and solved this problem with their "pro" model?
Thanks for any help.
Mark
Remembering that this is the 22-44 Pro, not the 22-44 (or "Plus") with tilt adjustment jack bolts back at the inboard head, has anyone here had and solved this problem with their "pro" model?
Thanks for any help.
Mark