miter gauge for agazzani bandsaw

[Gregg Feldstone]

Anyone know of a company that sells bars to fit Agazzani bandsaw miter slots, which I could than drill to fit my Incra miter gauges? I don't have to tools to machine it myself and don't want to pay a machine shop to do this.

[Mark Singer]

Greg,
I found the small miter gauge works ok for small stuff. For bigger things I made an table fixture that attaches very quickly. In this table you can rout or saw a dado for a conventional miter gauge.
http://www.sawmillcreek.org/attachment.php?attachmentid=47481&d=1159124996

http://www.sawmillcreek.org/attachment.php?attachmentid=47482&d=1159124960

[Gregg Feldstone]

Mark,
That looks pretty handy. Have you made a circle jig for your B20? I'm thinking of making an attachment which could be used as a circle jig and an extension table with miter slot like the one you made all in one. Do you think this would work?

[David Rose]

Mark,

How did you attach the auxilliary table(s)? I set a shop made table on top of my Delta's factory one. Soon I learned that I needed "more". So my auxilliary tables stand on legs. They are very unhandy to take down and store and set back up. This is my primary saw, so a larger table is essential. But I need something handier in my small space.

David


Greg,
I found the small miter gauge works ok for small stuff. For bigger things I made an table fixture that attaches very quickly. In this table you can rout or saw a dado for a conventional miter gauge.
http://www.sawmillcreek.org/attachment.php?attachmentid=47481&d=1159124996

http://www.sawmillcreek.org/attachment.php?attachmentid=47482&d=1159124960