Joe Fisher
11-12-2006, 11:41 PM
But close :)
A while ago I made this salad serving bowl for my neighbor:
http://www.fisherwoodcraft.com/images/bowl_081406_1.jpg
Now I'm working on a set of salad bowls for her. She couldn't decide if she wanted natural edge to match or normal edges. So I made a coupla prototypes (all from sycamore):
50032
50033
While hollowing the NE one I stopped the lathe to use my digital calipers (apologies to Bill G :) ) to feel the thickness of the walls. "Uh oh." I was sure it was going to be a funnel, but after turning it around on the friction chuck and being veeerrrrrrry gentle, I ended up with:
50034
:D
-Joe
A while ago I made this salad serving bowl for my neighbor:
http://www.fisherwoodcraft.com/images/bowl_081406_1.jpg
Now I'm working on a set of salad bowls for her. She couldn't decide if she wanted natural edge to match or normal edges. So I made a coupla prototypes (all from sycamore):
50032
50033
While hollowing the NE one I stopped the lathe to use my digital calipers (apologies to Bill G :) ) to feel the thickness of the walls. "Uh oh." I was sure it was going to be a funnel, but after turning it around on the friction chuck and being veeerrrrrrry gentle, I ended up with:
50034
:D
-Joe