Howard Rosenberg
11-06-2006, 3:04 PM
Hi all -
Several weeks ago someone posted their shop-built height-adjustable assembly bench.
I don't remember the poster's name - otherwise I'd go to his name and look through each of hist posts.
Here's a brief description -
The top was a torsion box.
Each leg was constructed in two parts and the upper part had a clamp-type affair that fit into drilled/routed recesses in the lower part.
Can someone help me out and find the post?
Thank you.
Howard
Several weeks ago someone posted their shop-built height-adjustable assembly bench.
I don't remember the poster's name - otherwise I'd go to his name and look through each of hist posts.
Here's a brief description -
The top was a torsion box.
Each leg was constructed in two parts and the upper part had a clamp-type affair that fit into drilled/routed recesses in the lower part.
Can someone help me out and find the post?
Thank you.
Howard