Don Baer
11-06-2006, 11:37 AM
I obtained a few pieces of aspen from a fellow turner. I was demoing turning at a craft fair on saturday and turned down a piece. Yesterday I finished the bottom and started putting some finish on it, It still needs more sanding and a few more coats but I figured I'd post some pics. Aspen is not fun to turn> No curls just powder..but the figure is amazing.
49655 49656
4 1/2" wide and 2 3/4" high. the wall thickness is around 3/64". Enjoy
49655 49656
4 1/2" wide and 2 3/4" high. the wall thickness is around 3/64". Enjoy