Todd Burch
10-25-2003, 10:52 PM
I have 3 staplers now and would like to be able to shoot 1½" staples, but my current max is 1".
I'm leaning towards the Senco SKS series. There are 3 available crown-width models: the 1/4" crown ("L" model), the 3/8" ("M" model) and the 7/16" ("N" model).
I already have an "L" model that shoots 3/8" to 1". However, I'm thinking I would like a wider width crown.
The "M" model is the same gauge staple as the "L" model, but the selection of staple leg lengths is limited (7/8", 1", 1 1/4" and 1 1/2").
The "N" model, a little thicker staple, has the largest selection of leg lengths (7/8", 1", 1 1/8", 1 1/4", 1 3/8" and 1 1/2") which is appealing.
An thoughts on a 7/16" vs. a 3/8" crown?
Thanks, Todd.
I'm leaning towards the Senco SKS series. There are 3 available crown-width models: the 1/4" crown ("L" model), the 3/8" ("M" model) and the 7/16" ("N" model).
I already have an "L" model that shoots 3/8" to 1". However, I'm thinking I would like a wider width crown.
The "M" model is the same gauge staple as the "L" model, but the selection of staple leg lengths is limited (7/8", 1", 1 1/4" and 1 1/2").
The "N" model, a little thicker staple, has the largest selection of leg lengths (7/8", 1", 1 1/8", 1 1/4", 1 3/8" and 1 1/2") which is appealing.
An thoughts on a 7/16" vs. a 3/8" crown?
Thanks, Todd.