Lincoln Myers
10-25-2003, 4:16 PM
Can I put Johnson's Paste wax directly over Zinsser's Amber 2lb cut shellac and expect good results?
Or should there be an interim step before the wax?
Thanks a lot,
Linc
Jim DeLaney
10-25-2003, 4:53 PM
Can I put Johnson's Paste wax directly over Zinsser's Amber 2lb cut shellac and expect good results?
Sure - no problem at all. If you want a lower luster finish, you might rub out the shellac with a bit of 0000 steel wool lubricated with mineral spirits before waxing. Wax and shellac are very compatible - Shellac even has wax still in it, unless it's been purposely de-waxed prior to use.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.