need help with glue

[everett lowell]

I got some Brusso hardware for a jewelery box project(nice stuff ,that Brusso-first time purchace) anyway,the drawer knobs have to be glued in place-can I use my reg. titebond glue for this task???many thanks in advance,you guys are the best!:)

[Mike Cutler]

Everett.


I'm going to assume that the Brusso knobs/pulls are made of metal. Is this correct? If so the Titebond won't give a lasting bond. I would go with either an epoxy,quality marine epoxy, not the 5 minute stuff, or a construction adhesive.

[John Miliunas]

I agree w/Mike on this one. I'd most probably use the epoxy, myself. Definitely "no" to regular wood glue, Titebond or otherwise. It will hold for a while, I'm sure but won't go the distance for you. :) :cool:

[Dennis Peacock]

Epoxt gets my vote. Just don't use the 5 min or 15 min setting stuff. In my experience, the longer set time epoxy works and holds better.