glenn bradley
10-18-2006, 9:02 PM
I am running cast iron extensions all the way out to the right on my TS as opposed to a wood framed extension. The Bies rails are probably strong enough to hold the extra weight but I thought I'd give it a little more support with some legs.
That requirement combined with a drive to sort out some of my less desirable scrap wood that is taking up too much room resulted in the combination support leg/accessory cabinet pictured.
Some old redwood left over from a water bed frame, some extra long full extension slides I didn't know what to do with, some crummy plywood and a little paint and shellac. I now have a sliding storage panel to hang my miter gauge, etc. on.
I'll get some decent hooks for the pegboard and load 'er up. Thanks for looking.
That requirement combined with a drive to sort out some of my less desirable scrap wood that is taking up too much room resulted in the combination support leg/accessory cabinet pictured.
Some old redwood left over from a water bed frame, some extra long full extension slides I didn't know what to do with, some crummy plywood and a little paint and shellac. I now have a sliding storage panel to hang my miter gauge, etc. on.
I'll get some decent hooks for the pegboard and load 'er up. Thanks for looking.