PDA

View Full Version : Crescent Chisel



Angelo Schembari
10-20-2003, 7:44 PM
have a wood chisel I picked up a while ago. Its all steel, and was made by ""crescent tool, Jamestown, ny" The blade is 1 1/4 wide, and about 3 1/2 long. Overall length is about 9 1/2 inches. this is obviously made for construction use and not fine carpentry. Anyone ever see one of these before? I saw 3, all the same size, at an antique too dealers once, and suddenly there are a few on ebay. I was wondering what sizes they were available in.

thanks,

Angelo