Dwayne R. Nahorodny
10-10-2006, 11:48 AM
Hey Guys and Gals,
This is my first time posting but I'm sure I'll be back often.
I have a project I'm working on that calls for automatic switches that will turn the small low-voltage lights on when the large cabinet doors open. They're going into a 7'x14' set of cedar waredrobes.
I'm using self-closing european hinges so the spring on the switch can't be too strong or I fear the doors may not close all the way.
What have you used in the past and who might be carrying them. The only one I've found so far is from Rockler, and I will need to modify it slightly so it will work.
I haven't totally ruled out making my own auto switches or just going with a few of those manual "tap" switches.
Thanks in advance for your thoughts and ideas.
This is my first time posting but I'm sure I'll be back often.
I have a project I'm working on that calls for automatic switches that will turn the small low-voltage lights on when the large cabinet doors open. They're going into a 7'x14' set of cedar waredrobes.
I'm using self-closing european hinges so the spring on the switch can't be too strong or I fear the doors may not close all the way.
What have you used in the past and who might be carrying them. The only one I've found so far is from Rockler, and I will need to modify it slightly so it will work.
I haven't totally ruled out making my own auto switches or just going with a few of those manual "tap" switches.
Thanks in advance for your thoughts and ideas.