John Bailey
10-09-2006, 7:58 PM
I've been using my recently purchased bandsaw on 2" Mahongony the last couple of days. Along with the bandsaw, I got 14 bandsaw blades. I've been trying out the different blades to learn what they do, and how they work. I've used four different blades. One 3/16th blade that works very well, a 1/2" 4 TPI blade that works very well, and then two 1/2" blades, one 5 TPI and one 8 TPI, that wonder all over the place. I've set the saw up like I've read and with the two blades that work well, the saw is very easy to use.
I'm assuming the two blades that don't work very well are just dull. However, I thought I ask the question here to see if there is something I'm missing.
Thanks for any input.
John
I'm assuming the two blades that don't work very well are just dull. However, I thought I ask the question here to see if there is something I'm missing.
Thanks for any input.
John