Nissim Avrahami
09-26-2006, 2:47 PM
Good day
I was spending the last few days on sanding.
I made small improvement to the ROS that gives me almost “zero dust” sanding.
You can use any other flexible material instead of the Weather tape (that’s what I had at the moment) to clear the orbit.
I found the Iron-on tape to be much better than the cardboard that I used on the square sanders.
Regards
niki
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS1.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS2.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS3.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS4.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS5.jpg
I was spending the last few days on sanding.
I made small improvement to the ROS that gives me almost “zero dust” sanding.
You can use any other flexible material instead of the Weather tape (that’s what I had at the moment) to clear the orbit.
I found the Iron-on tape to be much better than the cardboard that I used on the square sanders.
Regards
niki
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS1.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS2.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS3.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS4.jpg
http://i50.photobucket.com/albums/f321/avrahami/ROS%20DC/ROS5.jpg