Martin Gerber
09-10-2006, 9:32 PM
I am finishing a Craftsman cabinet. I am using a traditional fuming on QS white Oak.
I have an HVLP sprayer that I have not used for several years. I would like to use it on this project as there are many spindles and it is a relatively big project.
What would you recommend I use for the finish? I would like something that will not have a long learning curve associated with it.
Thanks.
I have an HVLP sprayer that I have not used for several years. I would like to use it on this project as there are many spindles and it is a relatively big project.
What would you recommend I use for the finish? I would like something that will not have a long learning curve associated with it.
Thanks.