Bob Nieman
09-07-2006, 2:27 PM
After looking at the Workbench April 2006 issue about customizing a table saw insert I bit the bullet when I next walked through the door of a Rockler store (armed with a 15% off coupon). 1400 miles later I got home and discover that there are no directions with the table. OK, the magazine has plenty. I would like to put the extension on the left side of my Ridgid table saw. It has the Herc-u-lift built in and I have to use it all the time (it is a tiny shop and the saw has to be moved for crosscuts vs rip cuts). I can mount casters on supporting legs per the magazine, but they won't reach the ground when I move the saw--is that a problem? The uneven floor is another issue--I don't see how I can add legs of a set length with casters and not have problems. I suspect I need to make adjustable legs--I am looking for ideas.
Thanks!
Thanks!