Mark Rios
08-23-2006, 11:56 AM
I'm having a little trouble understanding the instructions for this hinge.
Face Frame cabinets, Full inset doors, 3/4" thick material.
Please tell me if this is correct or not; The magic number is 9mm (?). The gap between the door stile and the cabinet stile PLUS the distance from the edge of the door stile to the hinge cup hole must equal 9mm (?). Is this correct?
So, in other words, I determine my gap. Then I subtract that number from 9mm and the remainder is the spacing between the door edge and the cup hole.
Do I have this correct?
Thank you very much for your help.
Face Frame cabinets, Full inset doors, 3/4" thick material.
Please tell me if this is correct or not; The magic number is 9mm (?). The gap between the door stile and the cabinet stile PLUS the distance from the edge of the door stile to the hinge cup hole must equal 9mm (?). Is this correct?
So, in other words, I determine my gap. Then I subtract that number from 9mm and the remainder is the spacing between the door edge and the cup hole.
Do I have this correct?
Thank you very much for your help.