Mike Hill
08-22-2006, 9:08 AM
My oldest Daughter has asked for a T.V. stand to hold their medium sized rear projection T.V. She wants it "similar" to the furniture they already have. The picture is of their "Texas Like" coffee table. My questions is, what type of wood to use for the T.V. stand and what this finish is? I think it looks like Pine and some kind of wipe on clear oil. Would appreciate some input from the Creekers on what this may be.
The stand Will be 45" wide and 34" deep. Legs will be 10 to 12" high. This low height will bring the T.V. up to a decent viewing level. The challenge will be to make the top substantial so it will not sag under the weight of the T.V. Would also appreciate it if anyone has seen a low table of this nature or knows of a design. This is a Christmas present for Wendy and her Husband.
Thanks
Mike
45386
The stand Will be 45" wide and 34" deep. Legs will be 10 to 12" high. This low height will bring the T.V. up to a decent viewing level. The challenge will be to make the top substantial so it will not sag under the weight of the T.V. Would also appreciate it if anyone has seen a low table of this nature or knows of a design. This is a Christmas present for Wendy and her Husband.
Thanks
Mike
45386