Which Grinding Stone Hone?

[Corey Hallagan]

I have the wolverine system and am seeing that I need to get one of the diamond hones thingies that sits in the jib and grinds down the stone flat again. What one do you all reccommend. Would just as soon not spend mega bucks on one. I see PSI has one for under 20.00 others are between there up to 50.00.

Thanks!
Corey

[Bernie Weishapl]

Corey I got mine from Woodcraft for $14.99. It does the job just fine.

[Mark Pruitt]

OK, now that I see what you're asking, I have the same T-shaped diamond dresser that Jim is talking about. It makes quick work of dressing the wheels on my grinder.

I initially thought you were referring to a "flat" stone that needed its "flat-ness" restored.

Mark

[Jim Becker]

I have an inexpensive "t" shaped diamond truing tool that I use for incidental cleaning and the OneWay truing system for major adjustments. (The latter is used less these days since I started using the OneWay wheel balancing system...)

[Scott Donley]

Corey, I also have the T-style diamond, got mine from Craft as a freebee when I bught my jig at the WW Show here. Works well .

[Corey Hallagan]

Thanks for the help guys!

corey