View Full Version : Showing my work

Rick Maitland
08-20-2006, 12:52 PM
You may have read an earlier post of mine were I was having trouble cutting through acrylic that had double-sided tape already applied to the acrylic. After many test runs I found that running it twice with the tape side up (Have to cut in reverse image) worked great. The smaller signs below were all attached using 1/16" steel braided cables. The light blue color in the large sign was the protective film on the back of the 1/4" clear acrylic. I completed it last weekend and the customer was pleased, but........ looking at these pic's would any of you pro's see something that you dont like, or would have changed? I am still learning and would greatly appreciate the input. Thanks.