Tyler Howell
08-07-2006, 5:21 AM
It's been a Festool field day as I try to tie up a few remuttling projects.
I've done a lot of demos and sheet goods dimensioning but a first for an easy cut on this door. Real simple set up and cleaner edge than the factory cut.
Punched a hole in 120 YO oak flooring with and 1.5" sub. nails and all for a cold air return on the HVAC. Like a hot knife through butter:cool: .
Lastly wanted to try making some cove trim out of scrap for a finishing project. Got the general idea but I'm going to need a steeper angle.
Great stuff. Thanks Uncle Bob.
I've done a lot of demos and sheet goods dimensioning but a first for an easy cut on this door. Real simple set up and cleaner edge than the factory cut.
Punched a hole in 120 YO oak flooring with and 1.5" sub. nails and all for a cold air return on the HVAC. Like a hot knife through butter:cool: .
Lastly wanted to try making some cove trim out of scrap for a finishing project. Got the general idea but I'm going to need a steeper angle.
Great stuff. Thanks Uncle Bob.