John Hulett
07-19-2006, 10:30 PM
Well, I finally got around to making the other three corner shelves orderd by LOML like the first one I built: http://sawmillcreek.org/showthread.php?t=24177.
Well, the glue-up is complicated, and as it is all over most of North America, the weather was up into the 100's. I looked around - I thought I had bought glue with a slow set time, but I was wrong - it was only Tightbond 2. I'm sure you can see where this is going. The dry fit went okay, but apply glue - which dried within just a few minutes - and what I got was a mess. The whole thing is ruined. :(
So, what glue do you recommend for these conditions?
- John
Well, the glue-up is complicated, and as it is all over most of North America, the weather was up into the 100's. I looked around - I thought I had bought glue with a slow set time, but I was wrong - it was only Tightbond 2. I'm sure you can see where this is going. The dry fit went okay, but apply glue - which dried within just a few minutes - and what I got was a mess. The whole thing is ruined. :(
So, what glue do you recommend for these conditions?
- John