7" elbow source for DC?

[Jeff Cord]

What is a good source of 7" elbows (45 and 90 degree) and wyes?
thanks,
jeff

[Rick Schubert]

PVC or metal?

Rick

[Norman Hitt]

PVC or metal?

Rick

I would think it would have to be metal, because PVC doesn't come in 7". It only comes in even numbered inches above 4", (maybe above 2", I just can't remember).

[Greg Narozniak]

Oneida has them. I just ordered 2 of the 7" adjustable ones because now that i moved when I mount my DC the inlet will be away from the wall. They have what you need.

http://www.oneida-air.com/products/ductwork/elbows.htm

Greg

[Ken Garlock]

Air Handling Systems (http://www.air-handling-systems.com/product_detail.asp?ProductID=2&PartID=276&CategoryID=1&SubCategoryID=1)is the place to go. They make their own parts. These are not the cheap junk your get at the borg, but parts that will stand the test of time.

[Chris Padilla]

7" connectors do not exist in PVC...only metal. Jeff, where do you live? Try to find a local source or one that is within reasonable driving distance. Shipping these suckers can cost as much or even more than the parts themselves! :eek:

[Russ Massery]

Here's my source, Just elbows no wyes in 7''.http://www.kencraftcompany.com/long_sweep_elbows_90_and_45_degr.htm

[Kent Fitzgerald]

Yet another source:
http://www.pennstateind.com/store/ductwork.html