Delta Drum Sander Paper?

[Matt Meiser]

Adam Howard's drum sander thread reminded me that I need to find a better source for paper for my Delta Drum sander. I've mostly used the Delta paper which is very pricey. I also tried some 2" cloth backed rolls from supergrit.com but that didn't work out as the backing kept breaking within a few minutes of installation.

[Russ Massery]

Matt, I don't have the Delta rather the performax. Any way I know what your saying about the precut being pricey. Here's a place to look at. http://www.woodworkingshop.com/cgi-bin/028466F1/mac/qryitems.mac/itemDisplay?qryType=STYLE&itemSt=SR002X45&coreDsc=2%22X45%20METER%20DELTA%20DRUM%20SANDER%20 ROLLS

[CPeter James]

Industrial Abrasives is another good source.

http://commerce.riverweb.com:8002/about.html

CPeter

[Brad Olson]

Matt,

I had Dave Zaret buy me a 50 ft roll of paper from Klingspor.

Cost was $30 and will do about 15 wraps or so.

Contact him on the SEMIWW board for more details of how to do the order. Tell him you need 2" wide paper for a drum sander and his sales rep will tell you what you need.