View Full Version : Jessem Router Plate Template Question
Jack Norfleet
07-15-2006, 5:34 PM
I plan on using a Jessem template to rout the hole for my new Woodpecker lift when I build my new extension wing. The Jessem template uses a straight bit and a bushing. Does anyone know what size router bit and what bushing is used. I cannot find the instructions
Brian Gumpper
07-15-2006, 6:21 PM
Looks like a 1/2" straight bit or spiral bit if this is the setup you are using.
http://jessem.com/routrplate.pdf
Jack Norfleet
07-15-2006, 7:48 PM
Brian,
Thanks for the link. The instructions for the lift didn't have the instructions for routing the hole.
It looks like a 1/2 inch bit in a 3/4 inch guide bushing.
Jack
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.