View Full Version : How the table came to be.
Kenneth George
07-14-2006, 3:29 PM
Well I said when I was building my Tilt-Top table that I had taken pictures the whole way through and some expressed interest in seeing how I did things with this table. Today I finally got around to finishing the write up and have uploaded it to my site. I must warn you though it is quite long.
So if you’re bored or just interested;
http://www.theturnersshop.com/turning/tilttop/tilttop1.html
Ken
Stu Ablett in Tokyo Japan
07-14-2006, 4:11 PM
Thanks for that Ken, what an amazing ride. :eek: :D
Make sure you sign that one!
Don Baer
07-14-2006, 4:19 PM
What stu said. Very good. Thanks
Doug Shepard
07-14-2006, 5:42 PM
Excellent Job! Both on the table, and documenting everything.
Bruce Page
07-14-2006, 7:27 PM
I'm not a turner but that was excellent!
Beautiful work! :eek:
Thanks!
Bernie Weishapl
07-14-2006, 8:10 PM
Beautiful job. Excellent documentation.
Corey Hallagan
07-14-2006, 10:54 PM
Excellent Ken. Thanks for posting it.
corey
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.