From there web site.
<TABLE cellSpacing=0 borderColorDark=#ffffff cellPadding=0 width="100%" bgColor=#ffffff borderColorLight=#666666 border=1><TBODY><TR align=middle><TD width="50%" height=20>WHEEL DIAMETER</TD><TD width="50%" height=20>14" (356MM)</TD><TR align=middle><TD width="50%" height=20>SAW BLADE WIDTH</TD><TD width="50%" height=20>3/8" (10MM)</TD><TR align=middle><TD width="50%" height=20>SAW BLADE LENGTH</TD><TD width="50%" height=20>93-1/2" (2375MM)</TD><TR align=middle><TD width="50%" height=20>TABLE SIZE (LXW)</TD><TD width="50%" height=20>14"X14" (356X356MM)</TD><TR align=middle><TD width="50%" height=20>TABLE HEIGHT</TD><TD width="50%" height=20>43" (1092MM)</TD><TR align=middle><TD width="50%" height=20>TABLE TILTING</TD><TD width="50%" height=20>45 DEGREE R, 10 DEGREE L</TD><TR align=middle><TD width="50%" height=20>WHEEL SPEED</TD><TD width="50%" height=20>700/1230/2420 FPM</TD><TR align=middle><TD width="50%" height=20>MAXIMUM WIDTH OF CUT</TD><TD width="50%" height=20>13-1/2" (343MM)</TD><TR align=middle><TD width="50%" height=20>MAXIMUM THICKNESS OF CUT</TD><TD width="50%" height=20>6" (152MM)</TD><TR align=middle><TD width="50%" height=20>MOTOR</TD><TD width="50%" height=20>1/2HP, 1 PHASE</TD><TR align=middle><TD width="50%" height=20>N.W.</TD><TD width="50%" height=20>78KGS</TD><TR align=middle><TD width="50%" height=20>G.W</TD><TD width="50%" height=20>81KGS</TD><TR align=middle><TD width="50%" height=20>PACKING</TD><TD width="50%" height=20>1110X510X380MM (7.6 CUFT)</TD></TR></TBODY></TABLE>
The resaw capacity look to be a litle small. From the picture there no way to add riser blocks. I'd look around some more if it were me. Heck my 12" sears will out perforn this one it got a 7" resaw capacity and is a 2 speed.